Gas Leak Detector
₹39,500
Product Code :
| Gas Type | Combustible |
|---|---|
| Detection Method | Electrochemical |
| Sampling Method | Probe sampling |
| Output Signal | RS-485 |
| Power Source | 230 V AC |
| Display Type | LED |
| Alarm Indication | Visual |
| Brand | Honeywell |
| Display Type | Digital |
| Color | white |
| Material | Fiber |
| Measurement Range | 10-20 LEL |
| Brand | Trace Automation |
| Power Supply | 220 V-240 V AC |
| Warm-up Time | 3-5 Minutes |
| Humidity Range | 10% ~ 95% Relative Humidity (RH) |
| Working Temp. Range | -10 Degree C ~ +50 Degree C |
| Sensor | Hot Wire Type Sensor |
| Alarm Reset | Auto Reset after Gas Clears |
| Indicator Information | Power: Green LED ON, Alarm: Red LED Flashing, Fault: Yellow LED Flashing |
| Relay Output | Connecting with Auto Shut Off Valve |
| Alarm Output | Sound & Flash Alarm (85 decibel), NO/NC is available |
| Static Current | 40 mA |
| Availability | In Stock |
LPG detectors (propane + butane)
LPG is an explosive hydrocarbon gas consisting of butane and propane. It is heavier than air and sinks to the floor in case of leakage. Therefore, the gas detector should be placed 15-25cm above the floor and within 1-2m horizontally within the range of possible gas leakage. REAL SAFE gas detectors respond audibly and visually before the leakage reaches 20% LEL. Detectors have microprocessor-based design.
Natural gas detectors (methane)
Methane is an explosive hydrocarbon gas. It is lighter than air and rises to the ceiling in case of leakage. Therefore, the gas detector should be placed 5-15cm below the ceiling and within 1-2m horizontally within the range of possible gas leakage. Real safe gas detectors respond audibly and visually before the leakage reaches 20% LEL (Lowest Explosion Level). Detectors have microprocessor-based design
Customer Reviews
No reviews yet.